RoboSemi
🚁

Drone & UAV Lab Setup

Build, Fly, Automate — DGCA-Ready UAV Training

Complete drone and UAV lab for 20 students. Covers airframe assembly, flight controller setup, autonomous waypoint missions, FPV systems, and DGCA regulations for educational institutions.

20 Students
3 Packages
6 Modules
4 Equipment Categories

Choose Your Package

All packages designed for 20 students — scalable on request

Starter

₹5–7 Lakhs

DJI Tello + build-your-own F450 kits for 20 students

  • DJI Tello Edu × 5 (programming-focused, SDK)
  • F450 Quadcopter Build Kit × 4
  • FlySky FS-i6X RC Transmitter × 6
  • LiPo Battery 3S 2200mAh × 20 + balance charger × 4
  • Emax 2212 motors + 30A ESC sets × 4
  • Indoor safety net enclosure (4×4×3m) × 1
  • Repair toolkit + propeller balance tool
3 months email support
Most Popular

Standard

₹14–20 Lakhs

Pixhawk autopilot, autonomous missions and FPV racing

  • Everything in Starter
  • Pixhawk 4 Flight Controller × 4
  • GPS + compass module × 4
  • Telemetry radio 915MHz × 4 pairs
  • 250mm FPV racing drone kit × 3
  • FPV goggles × 3
  • Mission Planner / QGC setup workstations
  • Oscilloscope 2-ch × 2
12 months support + DGCA regulation guide
Best Value

Professional

₹28–40 Lakhs

Fixed-wing, payload delivery, swarm concepts & DGCA remote pilot prep

  • Everything in Standard
  • Fixed-wing trainer (FPV Ranger) × 2
  • VTOL tiltrotor platform × 1
  • Thermal + RGB mapping camera × 1
  • RTK GPS for precision landing × 2
  • Companion computer (Raspberry Pi 4) mounted × 4
  • Drone simulator (DJI Flight Sim / Liftoff) × 20 seats
  • DGCA exam prep material + mock test
Dedicated UAV trainer + 24-month support + DGCA prep

Equipment List

Complete equipment for 20 students — varies by selected package

EquipmentQtySpecification
DJI Tello Edu5 units100g, 13 min flight time, Scratch/Python/Swift SDK, IR optical positioning
F450 Quadcopter Kit4 sets450mm frame, 2212/920KV motors × 4, 30A ESC × 4, 9×4.5 props
250mm FPV Racing Drone Kit3 setsBetaflight FC, 2306/2400KV motors, 35A ESC, 5" props, 3S/4S
Fixed-Wing FPV Trainer2 units1400mm wingspan, EPO foam, 1200KV motor, 40A ESC, ailerons/elevator/rudder

Software & Tools

Included software stack — licensed for each student workstation

Mission Planner

Open-Source

ArduPilot ground control station — mission planning, PID tuning

QGroundControl (QGC)

Open-Source

PX4 and ArduPilot GCS — cross-platform, clean UI

Betaflight Configurator

Open-Source

FPV racing drone setup — PID, motor mapping, rates

DJI Tello SDK (Python)

Free

Python-based autonomous Tello control for students

Gazebo + SITL

Open-Source

Software-in-the-loop drone simulation without risk

Liftoff / DJI Flight Simulator

Paid

FPV racing and autonomous flight simulation

Curriculum Modules

6 modules from Beginner to Advanced — typically covered in one academic semester

Duration: 1 week

  • Quadcopter physics
  • DGCA India drone rules 2021
  • DigitalSky platform
  • Categories: Nano, Micro, Small, Medium, Large

What Makes This Lab Complete

DJI Tello Edu for beginner programmable flight (Python SDK)

Pixhawk 4 for autonomous GPS waypoint missions

Indoor safety net enclosure for all-weather practice

DGCA India regulations, DigitalSky onboarding

FPV racing drones for advanced skills

Simulation-first training (Gazebo SITL + Liftoff)

Infrastructure Requirements

What your institution needs to provide before installation

Indoor Flight Area

Minimum 5×5m clear area with 3m ceiling height; soft indoor net enclosure mandatory

Room Size

Minimum 800 sq ft total — flight area + 20 student workstations + repair benches

Power

Dedicated 15A circuit for multi-port LiPo chargers; fire extinguisher CO₂ mandatory near charging area

Safety

First-aid kit, LiPo fire protocol poster, no-fly zone above 400ft signage, fire-resistant charging cabinet

Outdoor Option

Nearby open ground (football field / terrace) for outdoor mission practice; check DGCA TFR/NFZ before flying

Setup Process

01

Consultation

Our team reviews your space, budget and learning objectives to recommend the right package.

02

Procurement

We source all equipment, verify quality and arrange delivery to your institution.

03

Installation

Our engineers set up all hardware, networking, software and test every workstation.

04

Training

Faculty training session included — start teaching from day one with our curriculum guide.

Get a Custom Quote

For Drone & UAV Lab Setup — 20 students

reach@robosemi.in +91 XXXXX XXXXX Bangalore, India